19. Seal around the window with a bead of silicone caulk.
Tip
Buy specially designed caulk from your tile supplier to match the grout color in corners.
Click image to enlarge.
20. Mount the supply and discharge lines to the toilet with the seals provided and slip the toilet bowl into position over the mounting studs. Snug up the nuts, being careful not to overtighten and crack the porcelain.
Click image to enlarge.
21. Install the faucets and tailpiece in the sink before mounting. Mark the mounting holes on the wall and drill 5/16-in. holes through the tile and cement board and 1/4-in. holes into the backer boards. Screw the hanger bolts through the tile into the wood using the cap screw to drive the bolt . Slip the sink over the screws and snug down the nut.
Click image to enlarge.
22. Connect the sink to the trap and drain line, and the supply lines to the roughed-in copper lines with compression valve shutoffs. Mark, drill and mount the trap cover to the wall with hanger bolts.
Posts
No comments:
Post a Comment